jcb 1CXT User Manual

SERVICE MANUAL
BACKHOE LOADER
1CX, 1CXT
EN - 9813/6050 - ISSUE 2 - 07/2018
This manual contains original instructions, verified by
the manufacturer (or their authorized representative).
Copyright 2018 © JCB SERVICE
All rights reserved. No part of this publication may
be reproduced, stored in a retrieval system, or
transmitted in any form or by any other means,
electronic, mechanical, photocopying or otherwise,
without prior permission from JCB SERVICE.
www.jcb.com
Foreword
The Operator's Manual
You and others can be killed or seriously injured
if you operate or maintain the machine without
first studying the Operator's Manual. You must
understand and follow the instructions in the
Operator's Manual. If you do not understand
anything, ask your employer or JCB dealer to
explain it.
Do not operate the machine without an Operator's
Manual, or if there is anything on the machine you
do not understand.
Treat the Operator's Manual as part of the machine.
Keep it clean and in good condition. Replace the
Operator's Manual immediately if it is lost, damaged
or becomes unreadable.
Contents
01 - Machine
03 - Attachments, Couplings and Load
Handling
06 - Body and Framework
09 - Operator Station
12 - Heating, Ventilating and Air-
Conditioning (HVAC)
15 - Engine
18 - Fuel and Exhaust System
21 - Cooling System
24 - Brake System
27 - Driveline
30 - Hydraulic System
33 - Electrical System
72 - Fasteners and Fixings
75 - Consumable Products
78 - After Sales

jcb 1CXT Specifications

General

Brand	jcb
Model	1CXT
Category	Compact Loader
Language	English

Summary

01 - Machine

01-03 Safety

Details safety procedures and warnings for operating and maintaining the machine.

03 - Safety

01-03-03 Safety - Yours and Others

Emphasizes personal responsibility and awareness for safety when operating the machine.

06 - Safety Warnings

Explains signal words like DANGER, WARNING, CAUTION, and NOTICE.

09 - General Safety

Covers essential safety practices: training, alertness, clothing, and substance use.

12 - Maintenance Safety

Details safety precautions for maintenance, e.g., raised machines, chemicals, compressed air.

18 - Operating Safety

Covers safe operating practices like training, fuel handling, machine limits, worksites, and parking.

21 - Worksite Safety

Addresses hazards on worksites, including buried utilities, visibility, and organization.

24 - Risk Assessment

27 - Maintenance Positions

03 - Attachments, Couplings and Load Handling

00 - Attachments

03 - Direct-Mounted Attachments

09 - Lift Arm Quickhitch

10 - Excavator End Quickhitch

24 - Auxiliary Circuit

00 - Attachments

03 - Direct-Mounted Attachments

09 - Lift Arm Quickhitch

Health and Safety

10 - Excavator End Quickhitch

00 - General

03 - Mechanical Quickhitch

Remove and Install