jcb JS130 User Manual

8 - 6
Self Test Function (continued)
Setting Function
This section deals with setting separate parameters:
1 Breaker engine speed.
2 Automatic idle time.
In addition to the previous sections displays, the following
switches are used.
Setting Breaker Engine Speed
With the starter key in the ON position the display is as
shown. Start the engine.
Press the CHANGE switch to produce the display shown
right.
Press the PATTERN switch to produce the display shown
right. Engine RPM is displayed in the CLOCK window.
Section C Electrics
9803/6410
Section C
8 - 6
Issue 1
Self Test
Self-check
Message
WORK MODE
MODE
CLOCK
Change
Self-check
Message
WORK MODE
MODE
CLOCK
S : STANDARD MODE
Change
Self-check
Message
DESTINATION, MODEL NAME
WORK MODE
MODE
CLOCK
CH: MN
Self-check
Message
SETTING BREAKER ENGINE RPM
WORK MODE
MODE
CLOCK
EA: B
(
RPM
)
Pattern
S
L
H
F

jcb JS130 Specifications

General

Brand	jcb
Model	JS130
Category	Excavators
Language	English