11
Head Rest Adjustment
A
B
Adjusting the Headrest Height
Lever (B) is used to position and
lock the headrest at the required
height to suit your child. Loosen this
lever by turning it anti-clockwise.
Manually position the head rest into
the desired vertical position.
When a position of comfort and
support is found, the head rest
should be secured in place
by tightening the lever, turning
clockwise until suitably fixed.
•
•
•
Adjusting the Head Rest Position
Levers (A) should be operated
together to achieve the desired head
positioning of the user. Loosen the
levers by turning anti-clockwise.
Once loose, the head support
angle, vertical and horizontal
position can all be manually
adjusted to suit your child.
When the desired position has
been achieved the head support
should be locked into place by
tightening both of the levers,
turning them clockwise until secure.
Levers (A) can also be used
together to remove the headrest
and completely turn it around to
offer a greater range of adjustment.
•
•
•
•
To Next Page
Loading...