Footplate Adjustment
A
Adjusting Footplate Height
Levers (A) allow the operator to
position the footplate and cater
for the leg length of the user.
Loosen levers (A) by turning
them anti-clockwise.
Manually slide the footplate up
and down the legs.
Once a suitable position has
been acquired, lock into place
by re-tightening the levers.
Adjusting Footplate Angle
The angle the footplate sits at when
in use can be set using bolt (B).
Simply screw the bolt (using
an allen key) clockwise or anti-
clockwise to raise or lower the
footplate.
The footplate will remain in the set
position until further adjustment.
Never remove the bolt entirely as
this will stop you from being able
to set the angle of the footplate.
Flip-Away Footplate Motion
To flip the footplate away when
transferring the child to the chair.
Hinge the footplate upwards (C)
with your hands until it stays in the
vertical position.
When the footplate is once again
required you should gently ease it
back down into position.
•
•
•
•
•
•
•
•
C
B
To Next Page
Loading...