19
Adjusting Height & Width of Lateral Supports
Adjusting the Height of
the Back Support
Levers (C) are used to adjust
the height position of the back
support. This adjustment is
provided to cater for growth in
the child and allows for 100mm
of adjustment.
Loosen both levers (C) by
turning them gently in the anti-
clockwise direction (do not
remove the levers entirely.)
Once loose the back can be
manually adjusted to the desired
position by lifting or lowering it
within the slots provided (D).
Lock the back into place by re-
tightening levers (C), (turning
clockwise).
•
•
•
Turn both hand wheels (A)
anti-clockwise, enough to
allow for free movement.
Adjust the lateral supports
vertically or horizontally
until the required position
has been achieved,
enabling the user to sit in
a position offering both
comfort and support.
Lock the supports into
place by re-tightening
the hand wheels (turning
clockwise).
•
•
•
Additional Strapping
(B) - This slot has been provided
to allow for additional strapping
to be used if required.
Back & Lateral Support Adjustment
A
C
D
B
To Next Page
Loading...