Upon adjustment
NEVER remove the bolts entirely.
!
Hip Pads & Flexi Lap Strap Adjustment
Adjusting the Position of the Hip Pads
Loosen the two bolts (A) on the underside of the seat by turning them anti-clockwise
using the allen key provided. Do not remove bolts entirely.
When the bolts are suitably loose the hip pads (B) are free to be manually moved into
position.
When the pads are suitably supporting the user simply re-tighten bolts (A) to secure
the pads in place.
•
•
•
A
Adjusting the Flexible Lap
Straps
(C) highlights the plastic clip used to
adjust and lock the flexible lateral strap
into position. Pull open the clip and
feed the fabric belt through the buckle.
The belt should be pulled through
enough to suitably support your child,
when this has been achieved the
buckle should be snapped closed to
secure the belt into position.
•
•
View from underneath chair at the bottom
of the hip pads.
C
B
To Next Page
Loading...