15
Adjusting Leg Length
Adjusting Leg Length
The leg length of your Star X can be
adjusted by 4 inches to provide a
height allowance when the chair is
used without a multi height base or if
you wish to lower the footplate for a
user with longer legs.
To lengthen: press button (A) into
the frame, this should unlock the
leg in its frame and allow you to
slide the leg up or down within its
chamber.
Their are four holes (B) which act as
locator for the leg and you should
ensure that the leg button has
securely located into the desired
hole before operating the chair.
•
•
It is possible to adjust the
seat depth of your chair by
simply extending the back
outwards to maximise the
seat board available.
Loosen both levers (A)
(there is one either side of
the chair).
Slide the seat along the
frame by pulling equally
from the rear of the back
seat section.
When a suitable seat
depth has been acquired
the back should be
locked into position by
tightening the levers
(turning clockwise).
•
•
•
Adjusting Seat Depth
A
A
B
To Next Page
Loading...