11
The weight of your child is supported by the levers indicated. Ensure they are
locked of suitably at all times and thoroughly supported when adjusting.
!
The tilt in space should only be set to maximum when the chair is supervised
and your child is at rest. Activity in this position can potentially topple the chair.
!
Adjusting the Tilt / Prone in Space
The Sunbeam is fitted with a
substantial range of tilt adjustment
to enable you to seat your child in
a position of comfort and support
whatever the situation.
Loosen the locking lever (A) and
its opposing lever on the opposite
side of the chair by turning them
gently in the anti-clockwise
direction (never remove these
levers entirely.) Whilst performing
this operation the user should
maintain control of these levers
as the weight of your child will no
longer be supported.
Gently raise or lower the chair
and position the frame within
its adjustment range (B). Once
the desired position has been
achieved the user should lock
the chair in place by re-tightening
the levers, turning them in the
clockwise direction until secure.
•
•
A
B
To Next Page
Loading...
Need help?
General