5. Open the swing gate all the way to ensure
clearance of the rear window glass. Lift the rear
window glass.
6. Locate the wire harness on the left rear
inside corner of the vehicle.
7. Release the red locking tab by pulling out-
ward to the right.
8. To remove the wiring harness press the tab
and pull downward to disconnect.
9. To remove the washer hose, pinch the grips
on hose connector and pull downward.
Wire Harness Connector
Red Locking Tab
Press Tab To Disconnect
112
PAGE POSITION: 114 JOB: @zeta.tweddle.com/InfoShareAuthoroChrysler/CLS_InfoShareAuthoroChrysler/GRP_Owners_Manual/JOB_1180441-en-2013-WRANGLER-EE-13JK72-126-ENG-AA/DIV_Owners_Manual_v1
To Next Page
Loading...
