Chassis
Component Fluid, Lubricant, or Genuine Part
Automatic Transmission – If Equipped We recommend you only use MOPAR ATF+4 Automatic Transmission Fluid such as, TUTELA
TRANSMISSION FORCE4 FIAT Certification 9.55550-AV4.
Failure to use ATF+4 fluid may affect the function or performance of your transmission.
Manual Transmission – If Equipped We recommend you use MOPAR Manual Transmission Lubricant meeting the requirements of
Chrysler Material Standard MS-9224.
Transfer Case We recommend you only use MOPAR ATF+4 Automatic Transmission Fluid such as, TUTELA
TRANSMISSION FORCE4 FIAT Certification 9.55550-AV4.
Axle Differential (Front) We recommend you use MOPAR Gear & Axle Lubricant (SAE 75W-140) meeting the requirements of
Chrysler Material Standard MS-8985 such as TUTELA TRANSMISSION X-ROAD FIAT Certification
9.55550-DA5.
Axle Differential (Rear) 226 RBI (Model 44) - We recommend you use MOPAR Gear & Axle Lubricant (SAE 75W-140) meet-
ing the requirements of Chrysler Material Standard MS-8985 such as TUTELA TRANSMISSION
X-ROAD FIAT Certification 9.55550-DA5. Models equipped with Trac-Lok require an additive.
Brake Master Cylinder We recommend you use MOPAR Brake & Clutch Fluid DOT 4, that meets the requirements of
Chrysler Material Standard MS-9971 such as TUTELA TOP 4 FIAT Certification 9.55597.
Power Steering Reservoir We recommend you use MOPAR Power Steering Fluid +4, or MOPAR ATF+4 Automatic Transmission
Fluid such as, TUTELA TRANSMISSION FORCE4 FIAT Certification 9.55550-AV4.
312
PAGE POSITION: 314 JOB: @zeta.tweddle.com/InfoShareAuthoroChrysler/CLS_InfoShareAuthoroChrysler/GRP_Owners_Manual/JOB_1180441-en-2013-WRANGLER-EE-13JK72-126-ENG-AA/DIV_Owners_Manual_v1
To Next Page
Loading...
