3. Remove the seat from the vehicle.
Replacing The Rear Seat —
Two-Door Models
Reverse the steps for removing the seat.
WARNING!
• To help protect against personal injury,
passengers should not be seated in the
rear cargo area with the rear seat folded
down or removed from the vehicle.
• The rear cargo space is intended for load
carrying purposes only, not for passengers
who should sit in seats and use seat belts.
60/40 Split Folding Rear Seat —
Four-Door Models
To provide additional storage area, each rear
seat can be folded flat to allow for extended
cargo space and still maintain some rear seat-
ing room.
NOTE:
• Prior to folding the rear seat, it may be
necessary to reposition the front seat to
its mid-track position.
• Be sure that the front seats are fully
upright and positioned forward. This will
allow the rear seat to fold down easily.
WARNING!
• It is extremely dangerous to ride in a cargo
area, inside or outside of a vehicle. In a
collision, people riding in these areas are
more likely to be seriously injured or killed.
• Do not allow people to ride in any area of
your vehicle that is not equipped with seats
and seat belts.
• Be sure everyone in your vehicle is in a
seat and using a seat belt properly.
Release Bar Location
87
PAGE POSITION: 89 JOB: @zeta.tweddle.com/InfoShareAuthoroChrysler/CLS_InfoShareAuthoroChrysler/GRP_Owners_Manual/JOB_1180441-en-2013-WRANGLER-EE-13JK72-126-ENG-AA/DIV_Owners_Manual_v1
To Next Page
Loading...
