26 Glaciator X-Stream user manual
G
ENERAL
OPERATION
This chapter contains the following sections:
• “Fluid”, below
• “The refrigeration system” on page 28
• “Starting the Glaciator X-Stream” on page 29
• “Producing timed output” on page 30
FLUID
Important! The warranty on this machine is conditional on the use of
genuine JEM / Martin fluid only. Other fluids may represent a
health hazard when used in this machine, and may damage the
internal components by clogging the heating element or
spitting from the nozzle.
Warning! Do not bypass the fluid sensor, this could cause damage to
the machine.
The Glaciator X-stream has an on-board 5L (1.3 US Gal.) container that
provides approximately 1.5 hours of continuous operation at full output.
This will vary with the power supply voltage, which will determine the
maximum continuous output level. A remote fluid system can also be
installed (see “Installing a remote fluid system” on page 9).
To Next Page
Loading...
