4 Glaciator X-Stream user manual
I
NTRODUCTION
The Heavy Fog Glaciator X-Stream is designed for touring and installation
in a variety of applications. It can be easily integrated with most control
systems currently used in the entertainment industry. As well as the on-
board control panel, the fixture can be operated via a PLC remote, a JEM
remote control, or via a DMX control device.
The Heavy Fog effect is provided by cooling the smoke output from the
main heat exchanger until it is at a temperature lower than the ambient in
which the device is operating. Air is added to the smoke, prior to cooling,
from the fan mounted in the rear of the device. This increases the volume
of the effect and allows the output to be pushed through ducting.
A fluid container with 5L capacity (1.3US Gal.) is provided for Heavy Fog
fluid. To allow reliable unattended operation, the fluid level is monitored
electronically, and the device shut down if necessary. The fixture can be
connected to a remote fluid system for longer-running applications.
All devices come with robust transport handles and heavy duty braked
castors. A ducting adaptor is available as an accessory.
FEATURES
The Glaciator X-Stream features:
• Onboard 5L fluid capacity with the remote fluid system capability
• Electronic pump ramping system that enables continuous operation
• Electronic expansion valve
• Remote control interface
• Powerful 3.5kW heat exchanger enables high-volume output
• Two-channel DMX512 interface enabling to control from a DMX control
device
• Integrated PLC interface, enabling control via PLC
• Non-volatile memory for user settings
• Electronic low fluid detection warning
• High pressure piston pump
To Next Page
Loading...
