1. This manual is for reference only. The settings and functions
of your device may differ from those described in this manual due
to device updates etc.
2. Please check each accessory when you receive the item.
3. Turn on the camera and check that the screen comes out before
installation.
4. Please change the IP address before using the camera to
communicate within the same LAN.
5. This product can be added to a POE security camera kit. It can
also be used separately. The monitoring methods and
operations described in this manual are for single use.
Please note that some features may not be supported when
added to other POE security camera system.
Notes Before Installation
Support : support@jennov.com
To Next Page
Loading...
Need help?
General
