Jenny Science XENAX Xvi 48V8

35
9.6.13 Input / Output
DESCRIPTION
Short
CMD
PARAMETER
High / Low Activity of PLC outputs
-> refer chapter 4.4 Output Configuration
Set Output Activity
SOA
0-3
Set PLC output to logic 1 (level according, SOA)
Set Output
SO
1-2
Equivalent to SO, but set all outputs binary coded
Bit 0 = Output 1, Bit 1 = Output 2
Set Output Hex
SOX
0-3
Clear output (level according, SOA)
Clear Output
CO
1-2
Status all Outputs,
0= logic 0, 1=logic 1
Tell Output
TO
Status all Outputs in HEX format
Tell Output HEX
TOX
Preload output number for output function assignment with
command TYOF
Number Output Function
NOF
1-2
Assign type of output function to the with NOF preloaded
output number (0 = no function, 1 = REF, 2 = INMO, 3 = EDPG,
4 = TGR, 5 = ERR, 6 = BRK, 7 = INPO, 8 = IFML, 9 = IFSE,
10 = INSE, 11 = INFO, 12 = WARN, 13 = INFM)
Type Output Function
TYOF
0-13
Trigger upward counting, absolute, at output #x defined in
Output-Function, pulse during 5ms
Trigger upward
TGU
± 2'000'000'000 Increment
Trigger downward counting, absolute, at output #x defined in
Output-Function, pulse during 5ms
Trigger downward
TGD
± 2'000'000'000 Increment
0=all Input HIGH active, 1= all Input LOW active,
2= individual input activity selection according to ILAS (value 0
and 1 puts ILAS to 0x0 respectively 0xF)
Input LOW active
ILA
0-2 / ?
individual input activity selection, 0=Input HIGH active,
1=Input LOW active
Hex value binary coded for input 1-4 (values 0x0 and 0xF put
ILA to 0 resp. 1. All other values are to 2 by ILA
Input Low Active Single
ILAS
0-F / ?
Status all inputs, 0 = Low, 1 = High
/ ? incl. indication of input number
Tell Input
TI
1-4 / ?
Status single input, 0 = Low 1 = High
Tell Input
TI
1-4
Status all Inputs in HEX format
Tell Input HEX
TIX
Preload input number for input function assignment with
command TYIF
Number Input Function
NIF
1-4
Assign type of input function to the with NIF preloaded input
number (0 = no function, 1 = REF, 2 = IX, 3 = PG, 4 = SO, 5 = CO,
6 = JP, 7 = JN, 8 = CPOS, 9 = IP, 10 = SI, 11 = SIC, 12 = LS-,
13 = LS+,14 = EE, 15 = EE1, 16 = PWC, 17 = PRF, 18 = RSTO,
19 = OVRD, 20 = PGEX, 21 = DIF, 22 = PQ)
Type Input Function
TYIF
0-22
Parameter A of input function of with NIF preloaded input
number (value depending on input function, according to value
described in chapter 9.13.1 Selection of Input Functions)
Parameter A
PAIF
xx
Parameter B of input function of with NIF preloaded input
number (value depending on input function, according to value
described in chapter 9.13.1 Selection of Input Functions)
Parameter B
PBIF
yy
Parameter C of input function of with NIF preloaded input
number (value depending on input function, according to value
described in chapter 9.13.1 Selection of Input Functions)
Parameter C
PCIF
zz
Shows present position captured with input
Tell Capture Position
TCP
1-4
Shows the position captured with input 4
Tell Capture Pos. Buffer
TCPB
1-8
Set all 8 capture Position Register to 0
Clear Capture Position
CLCP
1-8 (all)