Jensen JHD1120 - Clock and Display Settings; Setting the Clock; Display Modes

JHD1120
7
Setting the Clock
To set the clock to display the current time, turn the vehicle ignition on and turn the radio on.
Enter the system menu and adjust the clock by selecting the “CLK” menu item.
• Press the INFO/ENTER button (16) to view the clock set screen.
• Press the TUNE/SEEK |<< / >>| (18, 19) buttons to adjust the selected digit.
• Press the INFO/ENTER button to move to the next digit.
• Press the TUNE/SEEK |<< / >>| (18, 19) buttons to adjust the selected digit.
When no adjustment is made for five seconds, the time will become set and normal operation
will resume.
Display Modes
Press the T/F button (12) to switch between LCD clock display and source display.