Jensen JXP680 - Specifications

JXP680
JENSEN
Specifications
JXP660 4-Channel Amplifier
Frequency Response ....................................................................................... 20 Hz-20 kHz + 0.5 dB
Signal to Noise Ratio @ Rated Power.. .................................................................................. >lOO dB
Channel Separation @ Ref. Power.. ............................................................................. >65 dB, 1 kHz
THD & IMD @ Ref. Power into 2 ohms ..................................................................................... ~0.8%
Speaker Impedance.. ............................................................................................................ 2-8 ohms
Input impedance ................................................................................................................. 47 k ohms
Bass Boost Center Frequency .................................................................................................... .45Hz
Crossover.. .................................................................................................. 12 dB/octave, Butterworth
Power Requirement .................................................................. 14.4 VDC (10.8-l 5.6 VDC allowable)
Power output @ 14.4 VDC, 20-20 kHz
(4 ohms) ........................................................................ 60 Watts per channel RMS, < 0.5% THD
(2 ohms) ........................................................................ 85 Watts per channel RMS, -Z 0.8% THD
(4 ohms) bridged ......................................................... 170 Watts per channel RMS, < 0.8% THD
Dimensions .................................................... .2.56” x 11.125” x 10.125” (65mm x 283mm x 257mm)
Specifications subject to change without notice.