What to do if there is no sound from my Jensen Marine Audio?
If you can't hear any sound from your Jensen Marine Audio, start by adjusting the volume to a level you can hear. Also, check the fader settings by pressing the AUDIO button and adjusting the FADER. Finally, make sure all wiring connections are properly connected.
How to fix Jensen Marine Audio when it cannot tune to radio station?
If your Jensen Marine Audio cannot tune to a radio station or auto-seek isn't working, ensure the antenna cable is firmly inserted. If the signal remains weak, try selecting a station manually.
How to fix Jensen Marine Audio when there is no power?
If your Jensen Marine Audio system has no power, first ensure the vessel's power is on. If connected to the accessory terminal, switch the ignition key to “ACC”. If that doesn't work, check the fuse and replace it if it's blown.
Why is my Jensen Marine Audio unit unresponsive?
If your Jensen Marine Audio unit becomes unresponsive, first, try reinstalling the control panel. If the issue persists, attempt to set RESUME in the menu, as this may resolve problems with the built-in microcomputer.
General| Tuner Bands | AM/FM |
|---|---|
| Bluetooth | Yes |
| Inputs | USB, AUX |
| Weatherband | No |
| Channels | 4 |
| Frequency Response | 20Hz-20kHz |
| Power Output | 4 x 20W |
| Maximum Power | 80W |
| Display | LCD |
Maintain awareness of surroundings by keeping volume low while boating.
Prevent damage from water submersion and high temperatures.
Use 12V DC negative ground and heed fire/shock risk warnings.
Essential steps before installation, including battery disconnection and testing.
Step-by-step guide for mounting the unit in a DIN opening with support strap.
Instructions for removing the unit and reconnecting the battery.
Visual guide for all electrical connections, including antenna and auxiliary inputs.
Detailed pinout of the unit's wire harness with color and function descriptions.
Specific instructions for connecting power, ACC, and ground wires.
How to turn the unit on/off, adjust volume, and use the mute function.
Switching between audio modes and resetting the unit to default settings.
Configuring Bass, Treble, Balance, and Fader settings through the audio menu.
Customizing system settings like contrast, low battery alert, and beep tone.
Understanding and enabling the low voltage warning system for the vessel.
Using EQ presets and iX-Bass for enhanced audio output at low volumes.
Connecting external devices and utilizing LCD display scrolling.
Switching radio bands and performing manual or auto seek tuning.
Storing, recalling, and scanning favorite radio stations.
Automatically finding and storing the strongest stations in the current band.
Switching to SIRIUS mode and storing favorite channels.
Accessing channels directly or browsing by category for content.
Retrieving SIRIUS ID and interpreting satellite signal strength indicators.
Supported iPod models and connecting them to the MSR2010.
Managing iPod playback, including pause, repeat, random, and track selection.
Using search modes and viewing information on the iPod display.
Guidelines for keeping the unit clean, dry, and protected from damage.
Troubleshooting radio noise from ignition systems and environmental interference.
Resolving problems related to no power, no sound, or mute settings.
Troubleshooting unresponsive units and radio tuning difficulties.
Technical details for FM and AM reception, including frequency and sensitivity.
Key specifications for voltage, impedance, power output, and dimensions.
To Next Page
