Jensen VM9226BT - iPod; iPhone Operation; Accessing iPod; iPhone Mode

46
VM9226BT
iPod®/iPhone® OPERATION
NOTE: Be sure your iPod ® has the latest Apple rmware installed to avoid
connectivity issues.
Accessing iPod® Mode
This unit is Made for iPod® and iPhone®. You can control your iPod® via touch screen
to access Playlist, Artist, Albums, Songs, etc. Supported models include, but are not
limited to the following:
• iPhone® 4S / 4 / 3GS / 3G and 1st Generation
• iPod®touch 4th / 2nd and 1st Generation
• iPod® nano 6th / 5th / 4th and 3rd Generation
• iPod® classic and iPod® with video
The unit will automatically switch to iPod® mode when an iPod® , iPod® touch or
iPhone is plugged into the front or rear USB connector.
NOTE: For basic iPod® connectivity, you can use the white 30-pin to USB iPod® cable
that came with your Apple device . For iPod® video or photo playback, you must
purchase the jLink-USB cable.
To return to the iPod® menu from any other source menu, touch SRC on the front
panel until the iPod® menu appears on the screen, or choose the iPod® icon from
the source menu (only available when an iPod® or iPhone® is connected to the USB
connector)