51
VM9324
Storing a Station
1. Select a band (if needed), then select a station.
2. Touch the on-screen MEM button to open the preset screen.
3. Touch the preset number in which you would like to store the current
station (or press Exit to cancel and close the menu). The preset number
and station appears highlighted.
Recalling a Station
1. Select a band (if needed).
2. Touch an on-screen preset button to select the corresponding stored
station.
Direct Tuning
To enter a radio station directly, touch the button or press the GOTO button
(21) on the remote control to display the direct entry menu.
Enter the desired radio station using the on-screen number pad. Touch the
arrow (enter) button to tune to the selected station. To exit the screen without
changing the station, touch Exit. To clear your entry and start over, touch C.
To Next Page
Loading...
Need help?
General
