62
VM9324
Pairing the Bluetooth System with Your Mobile
Phone and Head Unit
1. Press the button (7) to initiate the pairing process. Keep the mobile
phone within 2 meters of the head unit when pairing. (To terminate the
pairing process, press the button again.)
2. Select the Bluetooth setup option on the mobile phone to be paired
(please refer to the phone’s instruction manual to learn how to enter
Bluetooth setup, turn Bluetooth on/off, and perform pairing).
NOTE: Some phones require a “pass key” or pairing code to connect. If
your phone requires a pass key or pairing code, you will need to enter
this number in the Pairing Code field under the Bluetooth SETUP menu.
The default pairing code for many phones is “0000”. The default code for
the VM9324 is “1234”. See “BT (Bluetooth) Sub-menu Features” on
page 23 for instructions on entering the pairing code.
3. Select “VM9324” from the pairing list on the mobile phone.
• If pairing is successful, the TFT will display the paired mobile phone
model number or name (as specified in your phone’s Bluetooth Setup
menu).
• If pairing fails, “Phone Pairing Fail” is displayed at the bottom of the
screen.
To Next Page
Loading...
