To Next Page

To Previous Page

VM9726BT

Hands Free Prole (HFP)

To use a mobile phone with this unit, it is necessary to rst establish a connection

using Bluetooth® wireless technology. The connection is normally established

using Hands Free Prole (HFP), which gives you full control of functions available

on the mobile phone source. However, depending on your mobile phone, the

connection may be made using Head Set Prole (HSP), making some functions

unavailable. This is a limitation of your mobile phone, not the VM9726BT.

Since there are a number of Bluetooth® mobile phone implementations available

on the market, operations with your Bluetooth® mobile phone using this unit vary

greatly.

Please refer to the instruction manual that came with your Bluetooth® mobile

phone along with this manual while operating your mobile phone with this unit.

Pairing the Your Mobile Phone with the Head Unit

Your mobile phone can initiate a search for new devices and pair to the unit. The

following paragraphs describes the pairing process.

NOTE: The following procedures are generic. Procedures for pairing mobile phones

may vary slightly from mobile

phone manufacturer to mobile

phone manufacturer.

1. Press the SRC button on the front panel to access the Source Menu.

2. Touch the BT (Bluetooth) icon. The following screen will appear:

3. Set the Bluetooth function to ON.

4. Set the Auto Connect function to ON.

5. Access the mobile phone Bluetooth® function and set the function to ON.

6. Set the mobile phone Bluetooth® discover mode to ON.

NOTE: Some discovery modes have a time limit usually a minute before they are

automatically turned o.

7. Use the mobile phone’s add a new device feature. A device or devices will

appear on your mobile phone display.

Jensen VM9726BT User Manual

Other manuals for Jensen VM9726BT