Jensen VX3020 - Adjusting Fader, Balance, and Subwoofer Levels

VX3020
Adjusting
the
Fader and
Balance
The user
can
adjust front/rear fader settings,
L/R
balance
settings, and subwoofer
levels
here.
1.
Enter the
EQ
setup mode.
2. Touch the
[~~]icon
in the
EQ
interface menu.
Figure 19. Fade-Balance Adjustment Screen
Balance-
This feature
is
used
to
balance
the audio
output
levels
between the left
and right side
of
the vehicle.
Touch the
-4111
or...,..
icons
to
change the balance control
settings
-12
(Left)
to
+
12
(Right). The setting
can
also
be changed by touching
screen within the grid
to
move the
blue
sphere.
Fader-
This feature is used to fade the audio output
levels between the front
and rear
of
the vehicle.
Touch the •
or
T
icons to change the fade
control
settings
-12
(Rear)
to+
12 (Front). The setting can
also
be
changed by touching
screen within the grid to move the
blue
sphere.
Sub
(Subwoofer)-
This feature is used
to
reduce
or
increase the subwoofer
sound level. Touch the
slide
bar
~
or
...,..
icons to adjust the subwoofer volume
from
-12
to+
12. This setting
will vary depending on the
input
level
setting of your
subwoofer
amplifier.
To
exit the
balance-fader
touch the return icon on the
top
left
corner
of
the
screen.
NOTE:
•
The
EQ
mode
will
change to 'User'
automatically
when you adjust the frequency
value in
all
modes besides
'User~
31