EasyManuals Logo

Jerr-Dan MPL-NG User Manual

Default Icon
100 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #48 background imageLoading...
Page #48 background image
Section 4 : Operation
4-16 5376000253
20. Power retract the grid boom
until the towed vehicle is about
3 to 4 feet from the back of
the truck. Leave enough room
to maneuver around corners
without corner binding or
causing contact between the
two (2) vehicles. Be sure that
the boom is extended at least
4” to ensure unobstructed
crossbar pivoting.
21. Be sure to maintain su󰀩cient
clearances with the bottom of
the towed vehicle.
22. Attach the safety chains and
towing lights. Safety chains
should be crossed from one
side of the recovery vehicle
to the opposite side of the
towed vehicle.
23. Review Operator’s Pre-Transport Checklist before each tow.
For the best towing and
maneuverability the underlift
boom should be as close to
horizontal as possible.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Jerr-Dan MPL-NG and is the answer not in the manual?

Jerr-Dan MPL-NG Specifications

General IconGeneral
BrandJerr-Dan
ModelMPL-NG
CategoryConstruction Equipment
LanguageEnglish