M
martinezcarolSep 13, 2025
What to do if the conveyor belt does not move on my Jet 10 Plus?
- Kkyle77Sep 13, 2025
If the conveyor belt on your Jet Sander does not move, it's possible that the shaft coupler is not attached. Attach the shaft coupler.
To Next PageTo Next PageWhat to do if the conveyor belt does not move on my Jet 10 Plus?
If the conveyor belt on your Jet Sander does not move, it's possible that the shaft coupler is not attached. Attach the shaft coupler.
Details what is covered and excluded under the product warranty.
Outlines the process for requesting warranty service and repairs.
Specifies limitations and disclaimers related to the product warranty.
Lists essential safety rules for operating the drum sander.
Emphasizes the importance of safety glasses and protective clothing.
Covers safe use with wood and potential chemical hazards in dust.
Steps to correct drum alignment issues.
Advanced adjustments for specific sanding needs.
How to cut and taper abrasive strips for installation.
Step-by-step guide for wrapping sandpaper onto the drum.
Procedures for setting the depth gauge and depth of cut.
General
