Need help?Do you have a question about the Jet GH-1340W and is the answer not in the manual?
Details the one-year limited warranty on this JET product.
Information on ordering parts, their 30-day warranty, and proof of purchase requirement.
Comprehensive warranty terms, exclusions, and claim procedures for JET products.
Essential safety guidelines for operating the lathe, including personal protection and machine handling.
Lists the operational capacities of the lathe, such as swing over bed and distance between centers.
Details specifications for the headstock, spindle, and gearbox components.
Provides specifications for the carriage, compound slide, and tailstock.
Provides overall dimensions, net weight, and shipping weight for the lathe models.
Contains general notes about specifications and manufacturer's right to make changes.
Lists the main components included in the shipping container, such as the lathe and accessory rests.
Lists all the tools and accessories found within the provided tool box.
Steps for removing the lathe from its crate and preparing it for placement.
Instructions for cleaning rust-protected surfaces and lubricating the gear assembly.
Steps for safely removing, inspecting, and cleaning the chuck and its components.
Procedure for mounting the chuck onto the spindle and tightening it securely.
Instructions for checking oil levels, filling, and draining the headstock and gearbox reservoirs.
Procedures for lubricating the apron, leadscrew/feed rod, and tailstock.
Instructions for lubricating the ball oilers on the cross slide, compound rest, and carriage.
Steps for preparing and adding coolant, and checking its circulation.
Details power ratings and connection instructions for the lathe.
How to ensure the lathe is properly grounded and check spindle rotation direction.
Procedure for switching operation between 230V and 460V for specific models.
Description of the lathe bed and headstock construction, materials, and features.
Description of the carriage, four-way tool post, and apron functions.
Description of the tailstock, leadscrew/feed rod, and gear box components.
Description of the steady rest's purpose, mounting, and setting procedure.
Description of the follow rest and overview of the control panel components.
Explanation of headstock gear change levers and directional/selector levers.
Details on gearbox levers, knobs for feed and thread selection.
Operation of carriage lock, traverse hand wheels, and feed selector lever.
Function of the half nut engage lever and tool post clamping lever.
Operation of tailstock clamping, quill traverse, foot brake, and carriage stop.
Location of main power switch and initial break-in procedure guidelines.
How to reference gear box tables and set levers for feed and thread selection.
Step-by-step guide for replacing gears in the end gear compartment.
How to engage automatic feeds for carriage and crossfeed powered movement.
Steps for setting up and performing inch and metric thread cutting operations.
Table showing specific settings for cutting metric threads.
Table for setting inch leads and feed rates.
Table providing settings for various cross feed rates.
Procedure for setting the desired angle of the compound rest using its dial.
How to adjust the saddle and cross slide gibs for proper drag and fit.
Procedures for locking the tailstock, offsetting it for tapers, and adjusting its gibs.
Steps for checking lathe level and aligning the headstock if necessary.
Steps to adjust the headstock using screws and nuts to achieve alignment.
Procedures for removing and reinstalling the gap section from the lathe.
Steps for replacing drive belts and setting correct tension.
Procedure using a dial indicator to align the tailstock with the headstock.
To Next Page
General
