Jet JOVS-10 - Introduction; Specifications

7
Introduction
This manual is provided by Walter Meier (Manufacturing) Inc., covering the safe operation and
maintenance procedures for a JET Model JOVS-10 Oscillating Spindle Sander. This manual contains
instructions on installation, safety precautions, general operating procedures, maintenance instructions
and parts breakdown. This machine has been designed and constructed to provide years of trouble free
operation if used in accordance with instructions set forth in this manual. If there are any questions or
comments, please contact either your local supplier or Walter Meier. Walter Meier can also be reached at
our web site: www.waltermeier.com.
Specifications
Model Number ........................................................................................................................ JOVS-10
Stock Number .......................................................................................................................... 708411
Table Size (in.) ..........................................................................................................................24 x 24
Table Tilt (deg.) ....................................................................................................................... 45 down
Dust Port Diameter (in.)....................................................................................................................... 4
Spindle Speed (RPM) .................................................................................................................. 1,725
Oscillations Per Minute ..................................................................................................................... 75
Length of Oscillation (in.) ............................................................................................................... 1-1/2
Motor ............................................................................................... TEFC, 1HP, 1Ph, 115V Only, 60Hz
Overall Dimensions (LxWxH)(in.) ........................................................................................ 26 x 26 x 42
Net Weight, approximate (lbs.)......................................................................................................... 298
The above specifications were current at the time this manual was published, but because of our policy of
continuous improvement, Walter Meier reserves the right to change specifications at any time and without
prior notice, without incurring obligations.