Jet JWDP-12 User Manual

5
4.0 Specifications
Model Number ......................................................................................................................................... JWDP-12
Stock Number ............................................................................................................................................. 716000
Swing .............................................................................................................................................. 12 in. (305mm)
Type ....................................................................................................................................................... Bench Top
Drilling Capacity ............................................................................................................................... 5/8 in. (16mm)
Chuck Size ................................................................................................................................. 5/8 in. (0.8-16mm)
Spindle Travel ............................................................................................................................... 3-1/8 in. (80mm)
Spindle Distance to Base .......................................................................................................... 23-3/8 in. (593mm)
Spindle Distance to Table (max.) ................................................................................................. 17 in. (431.8mm)
Table Size Diameter (width x depth) ....................................................................... 9-1/2 x 9-1/2 in. (243x243mm)
Table Tilt .................................................................................................................................................. + or - 45°
Spindle Taper ................................................................................................................................................... MT2
Column Diameter .......................................................................................................................... 2-1/2 in. (65mm)
Number of Spindle Speeds ........................................................................................................................ Variable
Range of Spindle Speeds ............................................................................................................... 530-3100 RPM
Light Bulb ................................................................................................................................................ 40W max.
Overall Height ................................................................................................................................. 37 in. (940mm)
Base Size .................................................................................................................. 10 x 16-1/8 in. (252x410mm)
Motor ............................................................................................................. 115V only, 1/3HP, 1 PH, 5.0A, 60Hz
Net Weight (approx.) .......................................................................................................................... 85 lb. (38 kg)
Shipping Weight (approx.) .............................................................................................................. 92.5 lb. (42 kg)
The specifications in this manual are given as general information and are not binding. JET reserves the right to effect,
at any time and without prior notice, changes or alterations to parts, fittings, and accessory equipment deemed
necessary for any reason whatsoever.
Read and understand the entire contents of this manual before attempting assembly or
operation! Failure to comply may cause serious injury!

Jet JWDP-12 Specifications

General

Brand	Jet
Model	JWDP-12
Category	Power Tool
Language	English