3
31. Maintain tools with care. Keep drill bits sharp and
clean for the best and safest performance. Follow
instructions for lubricating and changing
accessories.
32. Disconnect tools before servicing; when changing
accessories, such as blades, bits, cutters and the
like.
33. Make sure the work piece is securely attached or
clamped to the table. Never use your hand to hold
the work piece.
34. Turn off the machine before cleaning. Use a brush
or compressed air to remove chips or debris — do
not use your hands.
35. Do not stand on the machine. Serious injury could
occur if the machine tips over.
36. Never leave the machine running unattended. Turn
the power off and do not leave the machine until it
comes to a complete stop.
37. Remove loose items and unnecessary work pieces
from the area before starting the machine.
Familiarize yourself with the following safety notices used in this manual:
This means that if precautions are not heeded, it may result in minor injury and/or possible
machine damage.
This means that if precautions are not heeded, it may result in serious injury or possibly even
death.
SAVE THESE INSTRUCTIONS
.
2.0 About this manual
This manual is provided by JET covering the safe operation and maintenance procedures for a JET JWDP-12 Drill
Press. This manual contains instructions on installation, safety precautions, general operating procedures,
maintenance instructions and parts breakdown. Your machine has been designed and constructed to provide
consistent, long-term operation if used in accordance with the instructions set forth in this document.
If there are questions or comments, please contact your local supplier or JET. JET can also be reached at our web
site: www.jettools.com.
Retain this manual for future reference. If the machine transfers ownership, the manual should accompany it.
Read and understand the entire contents of this manual before attempting assembly or
operation! Failure to comply may cause serious injury
To Next Page
Loading...
Need help?
General
