Jet JWL-1442VS Owner's Manual

8
Specifications JWL-1442VS
Stock Number................................................................................................................................ 708358
Over Bed..............................................................................................................................................14"
Swing Over Tool Rest Base..................................................................................................................10"
Distance Between Centers....................................................................................................................42"
Speeds (RPM)..................................................................... 450, 600, 850, 1100, 1500, 1900, 2300, 3000
Spindle Nose...........................................................................................................................1" x 8 T.P.I.
Drive Spindle Through Hole.................................................................................................................3/8"
Tailstock Spindle Through Hole............................................................................................................3/8”
Tailstock Spindle Travel..........................................................................................................................4”
Tool Rest..............................................................................................................................................12”
Face Plate..............................................................................................................................................6”
Headstock Rotation ..................................................................................45°, 90°, 135°, 180°, 270°, 360°
Headstock Taper ...............................................................................................................................MT-2
Tailstock Taper..................................................................................................................................MT-2
Spindle Center to Floor (approx.)....................................................................................................43-1/2”
Motor.........................................................................................................................................1 HP, 1Ph
.......................................................................................................................115V/230V, Prewired 115V
Net Weight (approx.).....................................................................................................................200 Lbs.
Shipping Weight (approx.).............................................................................................................215 Lbs.
708358K Shown
The specifications in this manual are given as general information and are not binding. WMH Tool Group
reserves the right to effect, at any time and without prior notice, changes or alterations to parts, fittings,
and accessory equipment deemed necessary for any reason whatsoever.

Jet JWL-1442VS Specifications

General

Brand	Jet
Model	JWL-1442VS
Category	Lathe
Language	English