Command
MFG
www.itorque.com
Parameters
11Jetco Torque Tools
Description
LIST OF ASCII COMMANDS
Exmaple
Command: MFG?<CR> or MFG<CR>
Response: 12 character serial number in the
format:
YYYYMMDDx123 where:
YYYY = year
MM = month
DD = day
x = firmware burning station
123 = serial number of device burned that
day
This number is loaded by the firmware
burning station only.
Log files are kept on the firmware burner
with information on the electronics.
The log file name will be YYYYMMDD,
indicating the present date, and a new file
will be started each day.
Get: CR at end or ? CR at endGet Manufacturer Serial Number
To Next Page