Operating Instructions
JETI spectroradiometer spectraval 15x1
Document Revision 105
3 Drivers under Windows 7/ 8/ 10
3.1 How to Install
Do not connect the device during driver installation!
Note: You must have administrator privileges to install the device driver.
• Insert the USB flash drive delivered with your device in an open USB slot on your
computer.
• Run install.exe from the USB flash drive. The following window will appear:
• Click the Install USB drivers... button and follow the instructions to install the
drivers.
• If a warning window appears that ‘Windows can’t verify the publisher of this soft-
ware’, click on Install Anyway.
• After finishing, connect your device to an USB-port. Windows completes the driver
installation automatically.
If the driver could not be installed successfully, please uninstall the driver according
to instructions from the next chapter, and try again.
Copyright © 2017 JETI Technische Instrumente GmbH 7
To Next Page
Loading...
Need help?
General