4. TO LOCK THE SEAT IN PLACE, CLOSE THE LATCH ON
THE SEAT CLAMP.
5. CHECK THAT THE SEAT IS SECURE: USE YOUR HAND TO
PUT DOWNWARD PRESSURE ON THE SEAT. IF THE SEAT
POST SLIPS FURTHER DOWN INTO THE TUBE, BRING
IT BACK TO POSITION AND TIGHTEN THE CLAMP BY
TURNING THE KNOB CLOCKWISE.
NOTE: IF YOU CANNOT OPEN OR CLOSE THE SEAT POST
CLAMP LATCH, THE KNOB MAY BE TOO TIGHT.
LOOSEN THE KNOB BY TURNING IT COUNTERCLOCKWISE
FOR 12 ROTATION AT A TIME UNTIL YOU CAN UTILIZE
THE LATCH.
To Next Page
Loading...
