TAKE GOOD CARE OF YOUR BOLT PRO TO KEEP IT RIDING SMOOTHLY AND SAFELY. HERE’S HOW:
HANDLING YOUR BOLT PRO
• AVOID EXPOSING YOUR BOLT PRO TO SEVERE VIBRATION OR INTENSE PHYSICAL IMPACT.
• NEVER DISASSEMBLE THE BATTERY.
• KEEP YOUR BOLT PRO AWAY FROM WATER AND MOISTURE.
• RIDE ON SMOOTH, FLAT SURFACES TO AVOID BREAKAGE.
• NEVER CARRY YOUR BOLT PRO BY THE WHEELS, SEAT, ANDOR HANDLEBAR.
• TAKE CARE NOT TO PULL OR SNAG THE WIRING CONNECTING THE MOTOR WITH THE HANDLEBAR COMPONENTS.
STORING YOUR BOLT PRO
KEEP YOUR EBIKE:
• INDOORS AND IN A DRY PLACE.
• COVERED, TO PROTECT IT FROM DUST.
• AWAY FROM FIRE OR EXCESSIVE HEAT.
• AT A TEMPERATURE BETWEEN 50 90°F 10 35°C.
CLEANING YOUR BOLT PRO
DO NOT SPRAY OR APPLY WATER DIRECTLY ONTO TO THE BIKE. WATER CAN CAUSE DAMAGE TO THE WIRING, BATTERY
COMPARTMENT, AND LIGHTS, AS WELL AS DETERIORATION OF THE FRAMEALL OF WHICH COULD CAUSE A MALFUNCTION
THAT PUTS RIDER SAFETY AT RISK.
HERE’S HOW TO CLEAN YOUR EBIKE:
• SEAT AND FRAME: WIPE WITH A DAMP DUSTFREE CLOTH OR ONE DIPPED IN RUBBING ALCOHOL. FOLLOW WITH A
DRY DUSTFREE CLOTH.
• HANDLEBAR: WIPE DOWN WITH MILD SOAP USING A DAMP DUSTFREE CLOTH. REMOVE EXCESS SOAP WITH A
SEPARATE DAMP CLOTH.
• WHEEL COMPONENTS: WIPE WITH A DAMP, DUSTFREE CLOTH.
• TIRES: WIPE WITH A DAMP, DUSTFREE CLOTH. A TIRE FINISHER OR CLEANER CAN ALSO BE USED.
Care & Maintenance
To Next Page
Loading...
