Jetson Bolt Pro - Charging the Battery; Connecting and Charging the Battery

33
2.3 Charging the Battery
IT CAN TAKE UP TO 4 HOURS TO BRING A DEPLETED
BATTERY TO FULL CHARGE.
1. CONNECT THE CHARGING CABLE WITH
THE CHARGER.
2. PULL OPEN THE CHARGING PORT COVER ON
YOUR BIKE.
3. PLUG THE CHARGING CABLE INTO THE WALL,
AND THEN PLUG THE CHARGER INTO THE
CHARGING PORT.
4. WHEN THE INDICATOR LIGHT ON THE CHARGER
CHANGES FROM RED TO GREEN, YOUR BATTERY
HAS REACHED FULL CHARGE. REMOVE THE
CHARGER FROM THE CHARGING PORT AND UNPLUG
THE CABLE FROM THE WALL OUTLET.
5. CLOSE THE CHARGING PORT COVER.
CHARGING PORT COVER
CHARGING PORT