Jetson Bolt Pro - Attaching the Pedals; Aligning and Threading Pedals

24
1.4 Attaching the Pedals
NOTE THE "R" (RIGHT) AND "L" (LEFT) MARKINGS ON THE END OF SPINDLE OF EACH PEDAL.
1. ALIGN THE SPINDLE ON "R" PEDAL WITH THE HOLE AT THE END OF THE CRANK ARM ON THE RIGHT SIDE OF THE BIKE.
2. HOLD THE PEDAL BASE STEADY AND, TAKING CARE THAT THE SPINDLE ENTERS THE HOLE STRAIGHT ON, USE YOUR OTHER
HAND TO TWIST THE SPINDLE CLOCKWISE INTO THE HOLE FOR A FEW ROTATIONS.
CAUTION: IF YOU FEEL RESISTANCE WHEN INSERTING THE PEDALS INTO THE HOLES ON THE CRANK ARM, THE SPINDLE
COULD BE ENTERING AT AN ANGLE INSTEAD OF STRAIGHT ON. REMOVE THE PEDAL AND REALIGN IT WITH THE HOLE
BEFORE MAKING ANOTHER ATTEMPT.
PEDAL R
SPINDLE
CRANK ARM