Jetson Bolt Pro - Securing the Front Reflector; Positioning the Front Reflector

28
1.7 Securing the Front Relector
YOU MAY NEED THE PHILLIPS-HEAD SCREWDRIVER.
1. ROTATE THE FRONT REFLECTOR CLAMP AROUND THE HANDLEBAR UNTIL
THE REFLECTOR IS FACING THE FRONT OF THE BIKE.
2. SLIDE THE REFLECTOR TOWARDS THE CENTER OF THE HANDLEBAR
UNTIL THE REFLECTOR CLAMP FEELS SNUG ON THE THICKER PART OF
THE HANDLEBAR.
3. IF NECESSARY, TIGHTEN THE SCREW IN THE REFLECTOR CLAMP BY
TURNING IT CLOCKWISE WITH THE SCREWDRIVER.
FRONT REFLECTOR
SCREW
PHILLIPSHEAD
SCREWDRIVER TIP