Jetson Bolt Pro - Tightening Pedals and Left Pedal Threading

25
3. FINISH INSERTING AND THEN TIGHTENING THE SPINDLE INTO THE CRANK ARM BY TURNING IT CLOCKWISE WITH
THE 15 MM WRENCH OR 15MM WRENCH TIP OF THE MULTITOOL.
4. CHECK THAT THE RIGHT PEDAL IS SECURE.
5. REPEAT STEPS 2  5 WITH THE LEFT "L" PEDAL.
IMPORTANT: THE SPINDLE ON THE LEFT PEDAL IS REVERSE THREADED AND NEEDS TO BE INSERTED AND
TIGHTENED WITH COUNTERCLOCKWISE TURNS.
15MM WRENCH