7. ROTATE THE HANDLEBAR WITHIN THE CLAMP BASES UNTIL IT SITS IN A "U" SHAPE WITH THE HAND GRIPS HIGHER THAN
THE CENTER AND IS IDEALLY POSITIONED FOR THE RIDER.
IMPORTANT: THE HANDLEBAR SHOULD BE POSITIONED SUCH THAT THE HANDBRAKE IS EASY FOR THE
RIDER TO REACH AND COMPRESS.
8. FULLY TIGHTEN ALL 4 BOLTS BY TURNING EACH CLOCKWISE WITH THE ALLEN KEY.
9. CHECK THAT THE HANDLEBAR IS SECURE.
6MM ALLEN KEY
BOLT
To Next Page
Loading...
