Jetson Shield User Manual

32
2.4 Using the Electronic Security System
YOUR SCOOTER COMES WITH AN ELECTRONIC SECURITY SYSTEM, WHICH PREVENTS IT FROM BEING USED BY ANYONE
WITHOUT ACCESS. THE SCOOTER WILL LOCK EVERY TIME IT IS POWERED OFF. TO USE THE SCOOTER, THE RIDER WILL NEED
TO UNLOCK THE SYSTEM USING AN INCLUDED NFC TAG SECTION 1.4 OR THE ELECTRONIC PASSCODE SECTION 1.5.
A LOCK ICON WILL ILLUMINATE ON THE LCD SCREEN SECTION 3.1 WHENEVER THE SCOOTER IS LOCKED.
IMPORTANT: THE SCOOTER CANNOT BE UNLOCKED AND USED WITHOUT AN NFC TAG OR THE 3DIGIT ELECTRONIC PASS
CODE. KEEP YOUR TAGS IN A SECURE PLACE AND MAKE NOTE OF YOUR PASSCODE FOR REFERENCE.
UNLOCKING
UNLOCKING WITH THE NFC TAG:
1. PRESS AND HOLD THE POWER BUTTON FOR 2 SECONDS TO POWER ON YOUR SCOOTER. NOTICE THE RED LOCK ICON.
2. TAP AND HOLD ONE OF THE NFC SECURITY TAGS ON THE NFC SENSOR UNTIL YOU HEAR TWO BEEPS.
3. CHECK THAT THE LOCK ICON HAS DISAPPEARED FROM THE LCD SCREEN.
4. YOUR SCOOTER IS UNLOCKED.
UNLOCKING WITH THE PASSCODE:
1. PRESS AND HOLD THE POWER BUTTON FOR 2 SECONDS TO POWER ON YOUR SCOOTER. NOTICE THE RED LOCK ICON.
2. QUICKPRESS THE THROTTLE AS MANY TIMES AS THE 1ST DIGIT IN YOUR PASSCODE. EXAMPLE: 3 QUICKPRESSES IN A
ROW = A "3". RELEASE THE THROTTLE AND PRESS THE POWER BUTTON TO ENTER THAT NUMBER INTO THE SYSTEM.
3. REPEAT STEP 2 FOR THE 2ND DIGIT IN YOUR PASSCODE.
4. REPEAT STEP 2 FOR THE 3RD DIGIT IN YOUR PASSCODE.
5. CHECK THAT THE LOCK ICON HAS DISAPPEARED FROM THE LCD SCREEN.
6. YOUR SCOOTER IS UNLOCKED.

Jetson Shield Specifications

General

Brand	Jetson
Model	Shield
Category	Scooter
Language	English