1.4 Activating the NFC Tags
YOU CAN USE THE NFC TAGS TO ELECTRONICALLY LOCK AND UNLOCK YOUR SCOOTER. SEE SECTION 2.4 PRIOR TO FIRST
USE, YOUR NFC SECURITY TAGS MUST BE ACTIVATED AND INDICATE A SUCCESSFUL PAIRING WITH YOUR SCOOTER. IT IS
ONLY NECESSARY TO DO THIS WITH 1 OF THE INCLUDED TAGS.
1. PRESS AND HOLD THE POWER BUTTON FOR 2 SECONDS TO TURN ON YOUR SCOOTER. NOTE THE LOCK ICON AND GREEN
SPINNING CIRCLE ON THE LCD SCREEN.
2. QUICKPRESS THE POWER BUTTON 4 TIMES IN A ROW. THEN TAP THE NFC SECURITY TAG TO THE NFC SENSOR.
A SUCCESSFUL PAIRING WILL BE INDICATED BY:
· 2 BEEPS
· A STEADY GREEN ILLUMINATION OF THE CIRCLE ON THE LCD SCREEN
· THE DISAPPEARANCE OF THE LOCK ICON ON THE LCD SCREEN
IMPORTANT: IF YOUR SCOOTER IS NOT RESPONDING TO YOUR NFC SECURITY TAGS, CONTACT THE JETSON CARE TEAM
FOR ASSISTANCE.
NFC SECURITY TAG CARE:
• AVOID GETTING YOUR TAGS WET. STORE THEM IN A DRY PLACE.
• TO CLEAN YOUR TAGS, WIPE THEM WITH A DRY DUSTFREE CLOTH.
To Next Page
Loading...
Need help?
General
