3.2 Using the Odometer
WHEN THE SCOOTER IS POWERED ON, YOUR ODOMETER TOTAL MILES TRAVELED WILL DISPLAY. "TOTAL"
AFTER YOUR SCOOTER IS UNLOCKED WITH THE NFC SECURITY TAG OR ELECTRONIC PASSCODE PAGE 32, THE DISPLAY
WILL TOGGLE TO THE TRIP ODOMETER "TRIP", TO DISPLAY THE DISTANCE TRAVELED DURING YOUR CURRENT RIDE.
NOTE: THE TRP ODOMETER WILL RESET EVERY TIME THE SCOOTER IS POWERED OFF.
TO CHANGE THE UNIT OF MEASUREMENTS ON THE SPEEDOMETER AND ODOMETER:
1. WITH THE SCOOTER POWERED ON, SIMULTANEOUSLY PRESS AND HOLD THE POWER BUTTON WHILE TAPPING
THE NFC SECURITY TAG TO THE NFC SENSOR.
2. RELEASE THE POWER BUTTON AND REMOVE THE NFC TAG FROM THE SENSOR AFTER THERE ARE TWO BEEPS AND
THE ILLUMINATED CIRCLE ON THE LCD SCREEN BEGINS TO BLINK.
3. QUICKPRESS THE POWER BUTTON 2 TIMES IN A ROW TO TOGGLE BETWEEN MILESMPH AND KILOMETERSKMH.
4. PRESS AND HOLD THE POWER BUTTON FOR 2 SECONDS TO SAVE THE SETTING AND EXIT THE SETTINGS MENU.
To Next Page
Loading...
Need help?
General
