4.5 Activating Cruise Control
CRUISE CONTROL LOCKS THE SCOOTER IN AT A CERTAIN PACE. ONCE YOU SET CRUISE CONTROL, THE MOTOR WILL DO
THE WORK TO KEEP THE PACE, SO YOU CAN RELEASE THE THROTTLE AND JUST STEER.
TO ACTIVATE CRUISE CONTROL:
1. USE THE THROTTLE TO REACH AND MAINTAIN YOUR DESIRED SPEED.
2. QUICKLY PRESS THE ACCELERATION THROTTLE TWICE AND THEN RELEASE IT. THE FOLLOWING SIGNS WILL INDICATE
THAT CRUISE CONTROL HAS ACTIVATED:
• AN AUDIBLE "BEEP"
• THE FLASHING OF THE ILLUMINATED CIRCLE ON THE LCD SCREEN 3 TIMES IN A ROW
• THE ILLUMINATION OF THE CRUISE CONTROL ICON ON THE SCREEN. SEE PAGE 34
3. LET GO OF THE THROTTLE AND CRUISE.
TO DE-ACTIVATE CRUISE CONTROL: GENTLY PUSH DOWN ON THE THROTTLE OR SQUEEZE THE HANDBRAKE.
THROTTLE
HANDBRAKE
To Next Page
Loading...
Need help?
General
