2MM ALLEN KEY
SCREW B
4. PLACE YOUR TRACKING DEVICE IN THE APPROPRIATELY SHAPED SECTION.
5. REPLACE THE INTERIOR PLATE SUCH THAT THE 4 HOLES IN THE PLATE ARE ALIGNED WITH THE 4 HOLES IN THE
COMPARTMENT BODY.
6. INSERT AND TIGHTEN THE 1 SCREW B FROM STEP 3 INTO EACH SET OF ALIGNED HOLES BY TURNING IT CLOCKWISE
WITH THE 2MM ALLEN KEY.
CIRCULAR TRACKING DEVICE SECTION
RECTANGULAR TRACKING DEVICE SECTION
TRACKING DEVICE COMPARTMENT
To Next Page
Loading...
