16
Auto Power Off(APO): Menu 01
Auto Power Off will automatically turn the
transceiver off after a set length of inactivity. This
function is disabled (off) by default. The Auto Power
Off interval can be set to 10 minutes, 20 minutes, 30
minutes, 40 minutes, 50 minutes, 60 minutes, 90
minutes, 2 hours, 4 hours, 6 hours, 8 hours, 10 hours,
12 hours, 14 hours, or 16 hours. The transceiver
displays a
icon when APO function is
enabled.
APRO (APRO): Menu 02
The audio processing menu allows you to set up the
compander and voice scrambler. This setting is stored
on a per channel basis. Each channel can have a
different processing setting. By default all processing
options are disabled (Off). You can set this menu to
either enable the compander (Comp) or voice
scrambler (Scra).
Busy Channel Lock (BC Lock): Menu 03
When a Channel has the “BC LOCK” function
enabled, the ability to transmit is disabled on that
channel if it is active. You will again be able to
transmit on the channel when the channel is quiet.
This option can be set to “ON” or “OFF”. The default
To Next Page
Loading...