45
Mute（MUTE）
When the Mute shortcut is enabled, pressing the Mute
key will disable audio from the receiver’s speaker.
Press the key again to unmute the speaker.
Scan（SCAN）
Pressing the LOW shortcut will toggle the power level
between HIGH and LOW power.
High/Low Power（LOW）
Pressing the LOW shortcut will toggle the power level
between HIGH and LOW power.
Emergency（EMG）
The EMG key will sound an emergency alarm. When
this alarm sounds, the indicator LED’s will alternate
between flashing red and green and “TX STOP” will
display on the screen. This mode will remain in force
until the PTT is pressed or the transceiver is powered
down.
V/M Mode Switch（V/M）
The VM shortcut will toggle the B operation between
VFO and MR mode.
To Next Page
Loading...
