43
You may set any of the programmable keys to perform
the following functions:
OFF
If a shortcut key is disabled, it is not usable unless
Wireless Change Frequency is enabled. Please refer to
Page 44 for details.
FM（FM）
Setting a shortcut to FM toggles the FM broadcast
radio on or off.
Band change（Bandchange）
In VFO Mode, the Band Change button switches
between the last used frequencies on 136 MHz, 245
MHz, or 400 MHz.
Time of system（Time）
Setting a shortcut to TIME will display the system
time. There is a built-in button cell (CR2032) which
supply power to continue timing system time when
the radio power off. Normally the button cell can use
several years, but you can change a new CR2032
when it is used out.
Note: The system time can only be set though program
software.
To Next Page
Loading...
