26
or other radio users who have CTCSS or DCS squelch
enabled. You may set Menu 10 as follows:
OFF: Disable. The transmitted signal does not send
any CTCSS or DCS codes.
CTCSS: Transmit a specified CTCSS tone (one of 56
tones)
NDCS: Transmit a specified normal DCS code (one of
107 codes).
IDCS: Transmit a specified inverted DCS code (1 of
107 codes)
Use Menu 11 to set the desired CTCSS or DCS tone,
using the same tables as for Menu 09.
FM Radio Function(FM): Menu 12
This transceiver has a built-in FM broadcast receiver.
You may listen to FM radio broadcasts using this
transceiver. To turn the FM broadcast radio on or off.
FM frequency range: 87.5-108MHz.
In VFO / MR / CH mode, press the “M” key, then
press “CHA+/CHA-“ or “VOL+/VOL-” keys to select
Menu 12, then press “M” key to turn on the FM
broadcast radio. To turn off again, follow the same
procedure.
To Next Page
Loading...
