23
Dual Watch (DW): Menu 07
This setting determines whether the dual watch
feature is enabled or disabled. With dual watch
enabled, the transceiver will monitor two frequencies
periodically. Select Menu 07 to modify this function,
which can be turned ON or OFF. The default is ON.
Decode Type and Decode Code (Menus 08 and 09)
Using Menus 08 and 09, you may determine what will
open the receiver’s squelch. Set the “DecType” option
(Menu 08) to select the squelch mode:
OFF: Any signal on the channel will open the
receiver’s squelch.
CTCSS: Only a signal on the channel containing a
matching CTCSS tone (one of 58 tones) will open the
receiver’s squelch.
NDCS: Only a signal on the channel containing a
matching normal DCS code (one of 107 codes) will
open the receiver’s squelch.
IDCS: Only a signal on the channel containing a
matching inverted DCS code (one of 107 codes) will
open the receiver’s squelch.
After you have selected the decode type in Menu 08,
select the CTCSS or DCS code in Menu 09 from the
following tables. You can press and hold
“CHA+/CHA-/VOL+/VOL-” key to go fast.
To Next Page
Loading...