20
C, and D. The default transceiver individual call ID
code is 1000.
Group Call: Using a group call character in any part
of a radio calling sequence will call all radios in a
specific calling group. The only radios in the group
that will not automatically respond to a group call are
transceivers which are either set to selective call only
or those which have receive or receive/transmit inhibit
enabled. The group character may be *, #, A, B, C, or
D. The default group character is A.
Consider the following example.
Set 10 transceivers as follows:
Item Individual ID Unite ID Group ID.
Transceiver
1
80811 C Group 1
Transceiver
2
80812 C Group 1
Transceiver
3
80813 C Group 1
Transceiver
4
80814 C Group 1
Transceiver
5
80815 C Group 1
To Next Page
Loading...
